Diaphragm wall stop end element extractor for sheet pile B800 , B1000mm

diaphragm wall stop-end sheet piles width 600mm, 800mm ,1000mm, 1200 mm

Diaphragm wall  Round stop end extractor,round stop end pipe extractor ,

Round stop end pipe puller of diaphragm

Hydraulic equipment designed for the extraction of diaphragm wall stop-end sheet piles width 600 to 1200 mm The unit is operated by a power pack and it is composed of heavy duty base frame with two trapezoid sliding columns maneuvered by 4 hydraulic rams with 750 mm stroke. The system is complete with locking system pins to ensure the stop end sheet piles to the sliding frames and to prevent dropping of the column.

Diaphragm Wall stop end elements

Diaphragm flat Wall stop end elements

Stop-End Elements of diaphragm wall

During production of cast-in-situ concrete diaphragm walls, the most important factor, especially to achieve a watertight joint, will be the use of the right stop end elements.

Especially on wide trenches (B 800 mm) the use of stop end elements instead of stop end pipes is compelling, not to shorten the re-inforced section of the diaphragm wall element.

To achieve water tightness between the individual diaphragm wall elements, a special rubber seal will be mounted.

200 400 600 B800  B1000mm 1200 1500

Stop-End Pipes

Stop end pipes are used for the production of diaphragm walls up to 60m depth during subway construction, for enclosures of construction excavations and other purposes. The pipe connections  are made from high strength steel and can be assembled easily

500mm ,600mm ,800mm 1000mm 1200mm 1500mm